-
Hey guys,
Just wanted to get this on the list for grbl mega. Not sure how this would be done but it would be nice to have the capability to do threading with a grbl controlled lathe.
If this shoul…
-
Hello! Thank you for you work - using ioSender on my 3 axis cnc running teensy just fine. But now I playing with 5 axis foam cutter running latest GRBL Mega 5X and having issue right from connect. Loo…
-
Hi,
@Schildkroet have done routines for backlash: https://github.com/Schildkroet/GRBL-Advanced
Would it be nice to have also this routines for MEGA 5X ?
BR
Walter
-
Hi! I'm proving an arduino MEGA 2560 + RAMPS 1.4 + Grbl - mega but I can't get the steppers motors move! I used XLoader and Universal GCode Sender. I had proved with simple code uploaded with Arduino …
-
Hello,
thanks for putting out a version of grbl that has backlash correction. I have not been able to test it because I could not find the pinout or connections that go to/from the mega board.
Can y…
-
hi,
Am looking to build a machine with additional Axis's
Mainly Dual Z Axis and an extra Lathe(Rotary) Axis.
I understand that the Rotary Axis is called Axis 'A'
Can i get input for what you w…
-
Hello
I have downloaded from grbl the mega 2560 for cnc
When I compile I get these errors. I have followed every instruction previously mentioned in another thread with these same errors and I sti…
-
Hi,
Homing only moves one motor at a time all other corexy movements (jogging etc) are ok.
https://github.com/gnea/grbl-Mega/issues/49#issue-285545751
A workaround was posted in the issue above but…
-
Hi there - is there a plan to align grbl-Mega with gnea/grbl (as opposed to grbl/grbl) please?
The reason is I just noticed there was a new release of gnea/grbl in August 19, so thought it may be e…
-
I am trying to upload your grbl but im getting the error below. The standard Mega grbl is working fine though and uploads without issue.
AppData\Local\Temp\arduino_build_561727\libraries\grbl\thcre…