-
Hi, i have issue with Adafruit_Floppy (Raspberry Pi Pico RP2040 (philhower core)), using Greaseweazle.
When i try to read ibm.1440 (gw read test.img --device=com14 --format=ibm.1440), floppy drive go…
-
This is from diskdefs.cfg from Greaseweazle.
disk ibm.800
cyls = 80
heads = 2
tracks * ibm.mfm
secs = 10
bps = 512
gap3 = 30
rate = 250
end
…
-
**Add start/stop and seek (preferrably directly to a position).**
When I use the floppy read test, I have a (tiny) bunch of floppys with no or different grade of errors on them to test with. Usuall…
-
Have an assortment of disks that have different side 1 sector id's the IBM std ones are from 27. I have non std disks would like to know what is expected from the printout which may be expecting inter…
-
Fluxengine's Greaseweazle documentation states that most features are available when using Greaseweazle hardware. Is there anything lacking in Greaseweazle firmware that would unblock missing features…
keirf updated
2 years ago
-
Greaseweazle 0.31, using an F4
I've two 5.25" drives connected, a 40track as drive 1, and 80 (1.2mb, jumpered for 300rpm) as drive 0.
fluxengine analyse driveresponse --cylinder 0 --min-interval…
drdpj updated
2 years ago
-
I've been unable to find a format option that will successfully read and write Altair 8-inch floppies. They're hard-sectored, 32 sectors, 76 tracks, one side, 128 byte sectors I believe.
Is this …
-
Have just set up the Linux version from the download and all the diagnostic stuff seems to work but i cannot find a command utility that lets me CMD talk to the greaseweazle board directly from a ter…
-
This started with these posts: https://www.msx.org/forum/msx-talk/hardware/kryoflux-has-anyone-used-one and https://www.msx.org/forum/msx-talk/software/kryoflux-unable-to-dump-illusion-city
So, th…
-
Hi, I'm trying to write some .d64 files for the Commodore 64 with my Greaseweazleand and a 5.25" drive TEAC FD-55GFR:
```
fluxengine.exe write commodore1541 -i mydisk.d64 -d drive:1
reading D64…