-
**Describe the bug**
When using the `DigitalRead` and `AnalogRead` functions included in the [device binding for GrovePi](https://github.com/dotnet/iot/tree/main/src/devices/GrovePi) to read sensor…
-
I am using a GrovePi Plus HAT with several sensors attached on a Raspberry PI. The board has both digital and analog ports. I could readout the sensor values without any problem with previous OS versi…
-
Up2 board + GrovePi shield, Ubuntu Server 16.04, MRAA 1.9.0 from PPA
I tried using the Javascript ISR example with a button connected through D4 on the GrovePi shield and got no response for any co…
-
Just got my new GrovePi+ board and I when through the install process using the 'Quick Start' method:
`sudo curl -kL dexterindustries.com/update_grovepi | bash`
tested the board using:
`sudo…
-
I have a newly installed pi3 with node.js 9.9.0 and npm 5.6.0. I created a groove directory and installed the node-grovepi package using:
```npm install node-grovepi```
I also ran the quick instal…
-
I have connected Grove Button (GPIO) and Grove Temp & Humidity Sensor (I2C) on UP2 Grove board. I notice the following error in systemd, when I try to read GPIO.
_*_Sep 05 06:20:49 ubuntu sudo[335…
-
Hi,
I am in the process of using mraa implementation to support GrovePI on Artik board. I have the implementation using mraa that works fine on UP2 board and Raspberry PI. Idea is to use the same imp…
-
We hit a weird error(`Error: Cannot find module 'i2c-bus'`) even we have done `npm install i2c-bus`, we have also checked:
```
$npm list|grep i2c-bus
├─┬ i2c-bus@3.2.0
│ ├─┬ i2c-bus@1.2.5
│ ├──…
-
I have a problem connecting the sensor to the I2C GrovePi Hat. Whenever I attach it to the board all addresses are busy:
pi@meteotux:~ $ i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d …
-
Hello,
I've got a rfid board PN532 connected to the I2C bus via the groove board and directly to the GPIO ping 3 and 5. Here's what I was able to get to so far:
Connected directly to I2C:
**nfc-s…