-
Thanks for the duck, here is quick demo code for the hackaday badge
```
from machine import I2C, Pin
import time
counter = 0
overlay = [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ]
duck_id = 0x6c
# …
-
Loading the website causes the images not to display. But following a link and then going back causes the images to properly load.
Reported-by: Flea86
-
Hello again,
I noticed that you are using the ESP32-C3-DevKitM-1. It has support for the usbhost. See an example https://hackaday.com/2024/11/17/esp32-hosts-a-usb-keyboard-in-this-typewriter/
and
…
-
I would like a hackaday.io /.com icon for linking to user profiles, much like how I use other social icons.
![screenshot 2015-01-22 17 05 02](https://cloud.githubusercontent.com/assets/1242952/5859250…
-
Saw someone mention on hackaday, why not add a SMD SAW filter for the 900mhz to cut out the excess noise, would make it a lot cleaner and more respectful while experimenting.
-
The GPIOs of the Raspberry Pico clone thus work at 5V, well above the specific 3.3V +/- 0.5V. Won't it fail in the long run?
-
Crankshaft NG has SD card partition names hard-coded in some places. That breaks booting and running from USB drives. For my own reasons (geometry), I need to skip the microSD card on my RPi 3B+. I tr…
-
Don't know why but recently I have been seeing podcasts being downloaded multiple times. I have see it happen 3 times but usually it is just twice. It renames the existing file as
-
pieco says: April 2, 2014 at 11:23 am
First, they should consider using better quality tips, and much, much shorter ones. Less backpressure. They might also want to consider trying plastic conical …
-
Found this wonderful project via the Hackaday Prize 2023 submission video. I was wondering if you had a bill of materials to give potential Felini builders an insight on project cost and part sources?