-
You recently added my design suggestion with a gear arm.
(https://github.com/hiveeyes/hanimandl-hardware/tree/main/variants/variante-5_dresden)
In order to be able to use this design, the option…
-
Hi there,
this project was a bit dormant for some time, and now that some kind people are approaching us [^1], we think it is time to resume maintenance. Every kind of contribution will be much wel…
amotl updated
5 months ago
-
Hi there,
I just discovered three nice projects and wanted to share them with you. They are AUnit [1], AUniter [2] and UnixHostDuino [3] and they will compile and execute unit tests for Arduino bot…
amotl updated
3 weeks ago
-
Hi there,
based on #21, we might want to add first-citizen support for the TTGO T-Display, see also [1] and [2]. I will try to get some slot for that together with @ClemensGruber. Thanks already fo…
-
Hi,
Could I run it on Arduino, or its the ESP32 choosen on purpose?
Thanks for this project!
Stefan
-
I see no output on the PWM pin and have tried several. It looks like there are no restrictions on which pins can be used with the S3 and that there are 8 PWM channels instead of 4.
-
Dear Roland,
thank you for your excellent work over here, and a belated happy new year (it is still January, right?). ;]
We are finally and gradually getting back to maintaining the original cod…
amotl updated
5 months ago
-
The Heltec WiF LoRa 32 is, beside the WiFi only version, a widespread board. So it may be that people have this laying around and want to use is also for the HaniMandl. Check used pins to get not in c…
-
Hab es zwar noch nicht debugged und wollte es mir noch anschauen und dann nen Push schicken. Aber im wifi branch gibt es einen Absturz wenn man in der Automatik bei der Anzeige start das Glas wieder e…