-
Hi.
This addon became unusable because it's generate many restarts of hassio.
It's totally at random.
It was working fine a few months ago, and suddenly, problems appear.
The last log is attac…
-
### What happened?
I removed the batteries from the thermal head, pressed the power button and put the batteries back in, it enabled synchronization mode and I started adding the device to zigbe2mqtt…
-
### What happened?
I want to add a new device to z2m but its not pairing correctly.
After selecting the device and click on "dev console" i were redirected to error page:
![image](https://github.co…
-
### What happened?
Click on "Dev Console" tab on an unsupported device shows an "oopsi" page
![Screenshot_20241109_212453](https://github.com/user-attachments/assets/c62c5be4-c684-40e9-a122-c946c842…
-
### What happened?
I added this bulb to zigbee2mqtt and it said it was not supported. I tried following the instructions to get it supported and
![IMG_6559](https://github.com/user-attachments/ass…
-
### What happened?
Sehe keine Geräte mehr in Zigbee2mqtt. In HA selbst sind aber alle Geräte da und Online nur unter zigbee2mqtt sind sie nicht zu sehen.
### What browsers are you seeing the problem…
-
### What happened?
the device is discovered by z2m but not supported and when i try to open the developer console in the first screenshot i find the message of the second screenshot that says its a b…
-
### What happened?
Trying to follow the "add support" guide. No download either, button does nothing.
### What browsers are you seeing the problem on?
Chrome
### Relevant stacktrace
```shell
**Cu…
-
### Checks
- [X] I checked Legrand API works properly [c2c](https://portal.developer.legrand.com/reference#api=smartherV2&operation=Get-subscriptions-to-C2C-notifications) and [Plants](https://portal…
-
### What happened?
Adding BSSED wall switch 2 gang
### What browsers are you seeing the problem on?
Chrome
### Relevant stacktrace
```shell
TypeError
Cannot read properties of undefined (reading…