-
With both the current versions of mhp and esphome I can't compile the projects anymore.
Here's the config:
```
esphome:
name: klima_wintergarten
friendly_name: Klima Wintergarten
esp3…
-
Hi
I'm using an external sensor for temperature monitoring like in your example:
```yaml
sensor:
- platform: homeassistant
name: "Temperature Sensor From Home Assistant"
entity_id: s…
-
I've got an Ochsner GMLW 19 with TEM-Controller connected to with john's ebus adapter.
ebusctl find:
.
address 15: slave #2, scanned "MF=TEM;ID=24849;SW=0604;HW=0102"
.
I'm using 15.24849.HW01…
-
Hello,
It seems that since the update to core-2024.5.0 the Thermia Calibra Cool integration (Generic x86-64) does not work anymore. Is this possible?
I did not change the Password and Thermia userna…
-
The _priority sensor is gone. It showed if the Heatpump was in Heating or Hot Water mode.
-
I've got a 2024 Model Y LR and use the MX+ with iOS. On the HVAC preset tab I've noticed that the cabin temperature report VCRIGHT_hvacCabinTemEst bounces around like it has a wrong bit field mask or…
-
Adapter to read/write Values to Waterkotte Heatpump with control device „Resümat“.
HW is available for testing and i can provide a JS Script which is currently reading the values.
-
Hi!
Trying your emulator. Installed latest `sbt` from https://www.scala-sbt.org/download (v1.10.0).
Getting the following error:
```
C:\Programs\mitsubishi_heatpump_emulator-master>sbt run S…
-
Dear Diyless,
I'm using your Diyless thermostat but ran into a conflict between the algoritm used by the Diyless and my heatpump.
I have a Quatt heatpump that works based on room temperature. Bas…
-
### The problem
I successfully connected to the Viesmann API and HA automatically detects my heatpump and 23 entities of it. However, it does not show me the electrical power consumption of the heatp…