-
This warning is shown in the log after upgrading from 0.31.11 to 0.41.20 on Home Assistant 2024.6.1.
It happens on every reboot of Home Assistant. The integration is working perfectly.
[home-assis…
-
If **ramses_cc** detects an issue with the **HGI80**, it currently sets a Problem status, i.e. `binary_sensor.18_199952_status`
What might be even better is if it resets the serial interface and tr…
-
Using a HGI80 and Home Assistant I'm trying to gain more insight. All seems well, but the heat demands of zones connected to the HCE80 controller stay unavailable (except the zone in which the evohome…
-
I'm just getting:
"TypeError: Cannot read property 'userID' of undefined"
Any thoughts?
Kind regards,
Tim
-
Hi guys, I desperately need your help and some guidance. I have an EvoHome system comprising 12 individual zones each one with its own DT92 thermostat. I have an HGI80 connected to Home Assistant and …
-
### Describe the issue you are experiencing
I have an official Honeywell HGI80 USB to Serial device that has been working fine on HAOS for many years. However recently it has started having issues. T…
-
Don't know if this can be properly named an issue and if this the proper way of contacting you, but I'll do it anyway. Thanks for the great work you guys all did on **ramses_rf**
I've been analyzin…
-
Hello,
I'm running the latest version of the script: "v3.11-0.22.40".
I issued a "mosquitto_pub -t 'evohome/_zone_independent/command' -m '{"sys_config":"SAVE_SCHEMA"}' -q 1" to generate the sch…
-
When the offical Honeywell HGI80 is used as the serial device, ramses_cc or ramses_rf are stressing it too much and the HGI80 hits a max duty cycle and shuts down. This is an inbuilt function designe…
-
Only permanent changes are supported. Binding needs to be aware of the schedule of the zone and use that info to create a temporary set point override with a maximum duration of 24 hours.