-
hi~
may i question your bms code.
why alert_mask variable clear at function entry?
after exe "ic_conf->alert_mask = 0" no more effect code
any here something else hidden function?
htt…
-
Hi,
In the issue:
* #2
you specified that the BMS-Designer extension was not Open Source, however it is not subject to a paid license for its use.
We have needs that are close to those addr…
-
Hi I have lilygo T-CAN 485 connected to my inverter Deye. It works very well.
Now I made seccond battery with jk BMS and I want to integrate it with Home Assistant.
JK BMS can connect with my phon…
-
Hi, I see that you are implementing a tripower smart energy SMA but will it also be compatible with single-phase ones? i.e. with Sunny Boy Smart Energy?
Will this protocol be implemented with batrium…
-
Hi is any chance to make possibility communication between JK BMS (PB version) and Deye RW-M6.1 battery via RS485 or can?
Thank for reply.
-
HI
I wanted to let you know that I was able to make the integration work BMS Tianpower TP-LT55AT.
I used an ESP32 board with CP2102 and restarted the BMS in order to associate the BT.
There are som…
-
Hi, I have just one quetion. It's possible to use this prgramm with a SEPLOS v2 BMS instead of an JK?
-
Hi. Total noob here (the extent of my knowledge was putting Victron VRM on pi3B).
I have a selectronic inverter (I am off grid) and about to replace ABB with Fronius AC couple). I will have upto 3…
-
Hi I have a old DC35 Dyson
-Part number at battery case 17083-22 12
-Part number at BMS board 17522 01-05
After opening the battery I can confirm that the MCU in this BMS board is the ATTINY44…
-
Unfortunately, in this model no settings to activate communication with battery. But it has wifi dongle out(rs232 maybe), which i use to pullout data from inverter to the home assistant over esp32(sys…