-
[DS_Homeassistant.docx](https://github.com/Mat931/digitalstrom-homeassistant/files/14735428/DS_Homeassistant.docx)
Dear all
I went through all the steps decribed in this page
https://github.com/M…
-
The suggested home automation HTTP request with Node Red worked perfectly. However, every call ended up causing a "too many redirect" error and causing unnecessary bandwidth across network.
This i…
-
### The problem
With the latest version, the SkyConnect loses its Zigbee Home Automation connection. After restart it works fine again.
more people suffer from this.
Core 2024.3.3
Supervisor…
-
I have tried a variety of combinations of CUDA, CuDNN, and TensorRT versions, using a variety of techniques when trying to run ResNet 50 v1.5 using CM on Ubuntu/WSL2/Windows 11/CUDA.
Most recently,…
-
### The problem
After update HA from version 2023.08 to version 2024.4.3 missed linked information about existing Automation in GUI of devices.
Misseв old automations and even if create new automa…
-
Hi
That's not an issue but theres no discussion tab so i will post it here.
First of all, great work. Google is not helping you here because this does not shows up on google at all, i was lucky …
-
### The problem
I have an automation that reacts on my garage door opening but since the May release it is broken. I can reproduce with a very minimal config. Simply monitoring the state of a switch …
J4nM updated
37 minutes ago
-
### The problem
Every time that I (re)start my home assistant lately I get a load of repairs listed, each of which is not true, and each requires 3 clicks to clear.
```
Chime - Freezer Door sta…
-
### The problem
I keep getting the following repair error for multiple automations after automations are reloaded, please note, I have been using this notifier for a long time with no issues, it is…
-
### The problem
I have automation that calls
```
- service: light.turn_off
```
Automation keeps running for 28-30 more seconds (which prevents running it again if new event occurs) or…