-
### Feedback
the yale access bluetooth integration recommends connecting some locks via homekit to enable push notifications https://www.home-assistant.io/integrations/yalexs_ble/
it suggests crea…
-
### The problem
Hi,
The connection between my Netatmo Weather station and Homekit is dropped 2-3 times per day.
It only start to work again when restarting the Netatmo Weather station main unit.
…
-
### The problem
My initial issue (integration completetly forezen wihout any indication in the sensor status in HA) with FP2 after upgrading to 2024.8 was resolved by @bdraco with introducing the new…
-
### The problem
The problem is based on the MYSA Thermostats. I used to have them to work until last spring and I can't remember exactly from when.
I have 5 of them and sundently I could not set th…
-
### The problem
Hello,
I have an integration via Homekit for 3 Mysa AC Remotes.
When I manually select Dehumidify/Dry within the Mysa app, it shows as 'off' for HVAC, but 'On' for Fan. When I …
-
I have a device that supports HomeKit (motion sensor, Aqara FP2).
Is it possible to link that device directly to this library?
I mean something like this:
```java
var homekit = new Homek…
-
### The problem
**Description**: I have an Atag One Zone thermostat integrated into Home Assistant (HA) via the HomeKit Controller integration. Previously, the thermostat reported temperatures with d…
-
### The problem
before, the event entity from the Ikea smart buttons had states single_press, double_press and long_press.
using those states we could trigger on the state_change to those event_…
-
### The problem
Connected via HomeKit Device my Hisense UN7Q does not support turn on/off.
No button in media player itself and action media_player.turn_on states: not supported
Directly in HomeKit…
-
Hello experts,
first of all many thanks that the firmware development is ongoing!!
Even with the new firmware I have the problem, that the shelly rgbw2 devices (using rgb+w mode, bridge + rgb + wh…