-
The problem
[Same issue as https://github.com/home-assistant/core/issues/90647](https://github.com/home-assistant/core/issues/103968)
The current valve positions of floor heating actuators are not…
-
### The problem
Since I updated the core to 2024.9.2 I have two errors for Homematic and die Entities are not available anymore.
I didn't change anything in the configuration files and also tried t…
-
i have problems sending a state to the saturation channel of the led controller. other channels could be read or written
but the reading of the saturation channel is succesfully.
after some communit…
-
****Versions:****
- Adapter version: v1.17.0 (v2.0.2 testweise installiert, Fehler das selbe)
- JS-Controller version: 6.0.11
- Node version: v20.17.0
- Operating system: Debian 12.7 (Proxmo…
-
### The problem
Same issue as #90647
The current valve positions of floor heating actuators are not available for logging.
The documentation shows that this is intentional:
There is no need …
-
### Discussed in https://github.com/Zefau/ioBroker.jarvis/discussions/2472
Originally posted by **Carbon1974** November 13, 2023
Auf einem Raspberry Pi 4 - 4GB habe ich eine IOBroker (v.6.3.5)…
Zefau updated
1 month ago
-
Continuing from the conversation that I started [here](https://github.com/LarsMichelsen/pmatic/issues/20), (but was in the wrong place).
Lars, following up on the guidance you gave I had a look. In…
-
Hey Peter,
ähnlich wie beim Jalousien Aktor wäre es klasse, wenn man für die Heizungs-Einstellung einen eigenen Datenpunkt hätte.
Hier der Auszug des Datenpunkts eines Homematic IP Wired Wandthe…
-
Hallo Leute, ich habe Homebridge auf meinem Pi 4 installiert und möchte nun das Homematic IP Plugin in Betrieb nehmen.
Nach der Installation des Plugins sollte ich, wie beschrieben den Access Point …
-
(make sure you also edit the title)
### Type (brand/model) of device
Homematic Actor HM-LC-Bl1-FM
### Homey Model
- [ ] "old" Homey (Pro)
- [X] Homey Pro 2023
### Is it supported by HomeyK…