-
**Is your feature request related to a problem? Please describe.**
Given a temperature and a dew point calculate relative humidity.
**Describe the solution you'd like**
A simple algorithm
**…
-
I have some values like -4.47034800288293e-08% for relative humidity will make round(2) fail in the template.
-
In RX_FSK/src/RS41.cpp, there's code based on https://github.com/einergehtnochrein/ra-firmware
Around line 648 the code is:
float Tp = (sensorTemp - 20.0f) / 180.0f;
float sum = 0…
-
Thank you for the good code, TUYA electrical appliance scale correction. I had the same problem, 10 times higher readings.
However, activating TUYA Fix also changed the TUYA temperature and humidit…
-
I feel this is a dumb question, but can I modify the temperature and humidity sensor offsets through zigbee?
I flashed a device and realise the temp is off.
-
### Is there already an existing issue for this?
- [X] I have searched the existing issues and there is none for my device
### Product name
_TZ3000_zl1kmjqx
### Manufacturer
_TZ3000_zl1kmjqx
###…
-
Straightforward remodelling of 12 terms with the following small changes to the preferred label for the following codes:
[CREL1001](https://vocab.nerc.ac.uk/collection/P01/current/CREL1001/) changed …
-
After flashing to this firmware, I noticed that the humidity readings on my O-1PPT outdoor model have been very off. It's currently reading 84% when it should be around 60% based on local weather serv…
-
### The problem
The timestamps for the forecasts from the SMHI integration is missing timezone information so the timestamp in the forecasts displayed in home assistant are off by one or two hours de…
-
I have recently spotted that the humidity sensor values stopped to regularly refresh. After restart of integration, the refresh is done but afterwards no changes are happing (although in Gardena app, …