-
I got below completely wrong.
The [local API](https://github.com/airgradienthq/arduino/blob/master/docs/local-server.md) already exposes parameters that have been compensated/corrected with "xxxxCo…
-
When I see the documentation of all the sensors I see a temperature/humidity compensation graph.
If your using these sensors outside, compensation would be a good thing.
-
Temperature readings are ok, but sometimes it suddenly gets negative values between others,
last readings in summer where 26° , 24° , 22° , 26°, 28° then **-26° -22°** then 29° , 26° ...
very s…
-
When configuring a yaml with other platform sensors, I can hover over the name and get a popup.
When I have sgp4x defined, hovering does not display any helpful information
```yaml
- platform…
-
I have three, one Nest thermostat and two created with the generic thermostat integration. The Nest thermostat does not appear as a device either.
-
### The problem
I am trying to connect ENS160+AHT21 to WeMos D1 Mini (ESP8266). Here is the code that I use:
```php
i2c:
## I²C Port - For Temp/Humidity/Pressure & CO²/VOC Sensors
scl: D1
…
-
### The problem
I bought SGP30 sensor, connected it, and after 3 days, it still says: "Baseline reading not available for: 43029s"
Sure, the timer goes down, but when I check it the next day, st…
Pitel updated
7 months ago
-
## Introduction
The new sensor API seperates the tasks of reading raw data from the device and interpreting (decoding) that data into a common numerical format, with common units, and such. The dec…
-
Does some one have tried this project with the new version VINDSTYRKA?
https://www.ikea.com/de/de/p/vindstyrka-luftqualitaetssensor-smart-00498231/
-
ADC readings are filtered, then it can be processed, before sending to user. Generally, we have three possibilities:
- convert readings to concentration values. This would require a lot of computat…