-
Hello,
I’m using the drivetemp kernel module since hddclient is deprecated, but sometimes the numbers of the hwmon interfaces change.
So my CPU is normally hwmon6 while my disks are hwmon1 to hw…
-
system: AMD EPYC 7713, 2x NVMe drives (no HDDs etc.).
Execution smfc.py on Debian 12 (kernel 6.1.0-27-amd64) fails while reading the temperature of NVMe drives - path to temp1_input is not correct.…
-
Hey! The ayaneo air 1s that I have does not allow manual fan speed settings with oxp-sensors. I built nfbc and used ec_probe to poke at the registers that HandheldCompanion has documented and things w…
-
## Description
(This continues the discussion I started in another issue as this one is related, but nevertheless separate)
On my machine at least, the sensors display is unusable when selecting…
-
Would it be possible to integrate support for standard linux hwmon that can monitor power of the system? I am running a small system (baseboard: [CM4-POE-UPS-BASE](http://www.waveshare.com/wiki/CM4-PO…
jviki updated
3 months ago
-
I'm running fancontrol-gui via the snap package manager and thus need udev rules. The default udev rules from this github assume hwmon7 to be the correct one for PWM control:
```
SUBSYSTEM=="hwmon",…
-
#### Bug Description
As in title the fans speed up if I close the GUI and slow down again to the configured setting if I open the GUI again
#### Expected Result
I guess the fans should stay at th…
-
In https://github.com/vmatare/thinkfan/pull/211, I implemented the hwmon `model` config option.
In the latest git build, `model` is no longer valid:
config:
```yaml
- hwmon: /sys/class/hwmon
…
-
**Do not report issue for old MangoHud versions**
**Describe the bug**
GPU usage is always 0%.
**List relevant hardware/software information**
- Linux Distribution: Arch Linux
- MangoHud vers…
-
Habana drivers expose several sysfs attributes through the _accel_ class: https://www.kernel.org/doc/html/latest/admin-guide/abi-testing.html#abi-file-testing-sysfs-driver-habanalabs
Habana drivers…