-
![image](https://github.com/user-attachments/assets/5ef1952f-b8bb-4675-9337-08d978490766)
-
Hi all
I have an inverter 1PH HYD6000 ZSS HP with S/N starting with: 239xxxx.
The script doesn't work, i get: "Solarman status_connection" -> "disconnected".
Could you plese send me any suggestion …
-
Hi everyone!
I'm trying to connect my Solar PV and Battery System composed by:
1. ZCS Hybrid Inverter (Model NO: AZZURRO 3PH HYD6000 ZSS)
2. logger with serial number **27XXXXXXXX** and Firmware …
-
Hello, I have seen your code and I cannot modify it in order to recover only the power produced in order to turn on my water heater, heating.
[https://forum.arduino.cc/t/rs485-et-sofar-solar/118067…
-
Hey,
I have a Sofar HYD6000 ES. I'm really happy with the data this gets back from the inverter.
With energy prices as they are in the UK I'd like to be able to charge the batteries from mains when…
-
Dear all,,
thanks a lot for all the contribution in this custom component.
At home I have a ZCS (sofar) inverter 10kw 3-phase.
I can't find any Yaml to integrate my inverter into my HA instance.
…
-
Hi Stephan,
nothing for HYD 6000 EP :(
If you have custom parameter for test
Thanks
-
Hi, wanted to ask if given inverter is supported.
-
I get the following error message in the log when adding a Deye SUN600G3-EU-230 inverter. Unfortunately, data can also not be pulled.
Firmware inverter: MW3_16U_5406_2.06
```
2023-10-05 12:52:4…
-
Got everything setup. Everything is identical compared to the manual except Device serial Number and firmware. Mine is LSW3_14_FFFF_1.0.38 where in the screenshot inside manual is LSW3_14_FFFF_1.0.29…