-
Actual code provide basic low level sniffer for (PCD/PICC) ISO/IEC 14443A when using dnfc2 => sniff command
`T_SNIFF (Test special sniffer ST25R3916 MCU_CLK(PA5) and CSI CSO)`
It requires a Logic An…
-
Same as BusPirate and HydraBus do support.
Transparently bridging USB & USART (maybe with some escape seq to quit the mode or just reboot pm3).
It would allow sending easily `AT+` from host and also…
-
hello, when compiling with makefile it generates blackmagic.bin and blackmagic.hex but no blackmagic.dfu. here is the output with mys2
I use the command : make PROBE_HOST=hydrabus
Memory reg…
-
I note that there is a closed issue regarding this topic (https://github.com/smillier/HydraLINCAN/issues/3) that did not appear to have a fulfilled resolution.
I too am interested whether there are…
-
See commit [7ddfa04](https://github.com/hydrabus/hydrafw_hydranfc_shield_v2/commit/7ddfa04c92705aa2229dc46351a828d1703788fa)
1) Modify BBIO_NFC_CMD_SEND_BITS to use a generic command to send bits as …
-
It would be great to be able to define aliases for certain recurring commands, like "`alias atr = ]%%[read:33`" for smartcards or something like that.
Aliases could be loaded from the MMC in the fo…
-
Hello beautiful people.
I work for a big ECAD software house, writing articles.
I would like to make a couple of articles improving the bus pirate V4 hardware.
Which features / improvements / b…
-
There are lots of inconsistently implemented features in all in-tree platforms which should obey the same internal API.
The actually-invoking-UB one is `platform_target_voltage()`, see #1866. But als…
-
I want to add support for the `dp83848` Ethernet module from Texas Instruments, but after searching through the forum and the docs - I found no description of what is necessary to accomplish that.
…
-
Remove the usage of Python to build the version (from GitHub Tag) and build DFU for STM32F405
=> https://github.com/hydrabus/hydrafw/tree/master/src/build-scripts
1) Remove hydrafw-revision.py / h…