-
I wanted to create I2C Slave assembler code but without success. Could you make also such code example?
-
### Description
Title. Doing it cuz its faster and easier.
### Acceptance Criteria
- [ ] Interface for I2C DMA calls
- [ ] All I2C read and write calls are replaced with reading and wiring t…
-
Hello
I have connect one led which is ssd1306, and when i build the kernel, i have choose i2c to support ssd1306, but when use this system, i can not find device file in /dev/i2c-xx,should any one…
-
Hi Spirik,
Thanks for all of your work on this library. I'm working on setting up a menu with GEM for an ESP32 based controller project. We are using the https://github.com/RobTillaart/ADS1X15 lib…
-
While Heltec did not label any pins as SDA/SCL, it is still possible to use few unassigned GPIOs for I2C communication. I've just tested BME280 with GPIOs 4 and 5. Is any "official" choice of such pin…
-
Check [PeakSat SW notes](https://docs.google.com/document/d/1zT9y58cpf8ykZvxmi_w0iWVeEVU_QG9X/edit?usp=drive_link&ouid=102020540055982368370&rtpof=true&sd=true) for this bus connections and addresses.…
-
I've looked and looked at the schematics page.... Does someone have a better pin breakdown of what the GPIO's are they relate to?
I am trying to setup a one_wire bus and a i2c bus using ESPhome.
…
-
Hello, let me first start off by typing, your work is highly appreciated! thank you one million.
This may be a rookie question but how is the i2C address of the IC changed? I see on the tech datas…
-
Hello Colleagues,
@AlexGyver Thank you for sharing this amazing library.
I'm using the 1.6.1 Gyveroled Arduino library version, but I'm facing problems with the Raspberry Pi Pico RP2040.
I'm…
-
**Describe the bug**
The I2C DW target driver does not properly check the return values of callback functions as defined in the I2C target API. Specifically, the functions `i2c_target_write_req…