-
In system menu, v1.3
Connected via BLE:
System Status
2024-07-17 20:22:35.870
ERROR: I2C bus not responding!
GNSS: Online - UM980 firmware: 11833
I suspect this…
-
### Boards
AMB82MINI
### External Hardware
icm42688 ,sht30
### Hardware Configuration
no.
### Version
latest main (checkout manually)
### IDE Name
arduino 1.8.19
### Oper…
-
# Software Used
- CircuitPython V3 Battery Board Software
# Issue Description
For some reason after initialization of the PySquared_EPS the I2C devices do not respond in a timely manner. After ke…
-
### The problem
I have tried multiple different json settings but I can't seem to get my AS3935 lightning sensor to be detected by ESPHome.
On Tasmota firmware it worked fine, Loading a generic 'i…
-
I am working with two Qwiic sensors connected to a raspberry pi zero via a qwiic pHAT. When the pHAT is not connected the I2C addresses of the PiSugar2 can be detected and data can be read from it. Ho…
-
ddcutil interrogate
Examining device /dev/i2c-4...
Obtain and interpret EDID using normal i2c functions
.....
DDC communication succeeded
Do you know why interrogate works…
-
**Set-up**
* STM32L496 MCU with I2C device which required I2C-memory transfer (`HAL_I2C_Mem_Write_IT` /` HAL_I2C_Mem_Read_IT`)
* STM32CubeIDE Version: 1.16.0
* STM32CubeL4 MCU Firmware Package 1…
-
Hi,
I just build this device. Worked on first try! (nice job)
Sort of.
The OLED exists in multiple variants. I2C and SPI. While i bought the correct one 4pin, the pinout was VCC GND I2c i2c. Yo…
-
I am just a hobbyist, so my description might not be very clear. Please bear with me.
My program runs on an ESP32-C3, and I use `i2c0`. When I alternately access devices at two different addresses …
-
```
> make driver/input/imx53_tablet
In file included from /data/genode-world/src/driver/input/imx53_tablet/egalax_ts.h:23,
from /data/genode-world/src/driver/input/imx53_tablet/…