-
**Describe the Enhancement**
Currently the fram is "cleared" between reset of the stm32 since the read/write addresses are stored in memory. By storing the addresses on the nvm fram chip, we would be…
-
Hi, I have connected FM24C04B.
i2c scanner shows me this addresses:
```
01:07:29.324 -> I2C device found at address 0x50
01:07:29.324 -> I2C device found at address 0x51
```
but I have only one …
-
**Describe the problem you have/What new integration you would like**
Support for external storage like MB85RC256V instead of internal flash.
**Please describe your use case for this integra…
-
**Actual Behavior**
Adafruit FRAM I2C driver start renders the detector firmware application to be freezed while LMIC driver (LoRaWan RFM95 module driver) is in operation.
**Expected Behaviour**
…
-
It would be wonderful to have out-of-the-box support for non-volatile [ferroelectric random-access memory (FRAM)](https://en.wikipedia.org/wiki/Ferroelectric_RAM). This would be useful for cases where…
-
I'm trying to get some example sketch [MB85RC256V.ino](https://github.com/adafruit/Adafruit_FRAM_I2C/blob/master/examples/MB85RC256V/MB85RC256V.ino) running on Arduino Due to interface with an [Adafru…
-
Hi,
Great thanks for your great work I2C.
When I ran the code, I met many problems. I have changed the code for training I2C on CUB-200-2011 dataset, however, I found that the obtained top1 and …
-
Since the SuperLongBoard is not yet available in Web Builder, I'm trying to build firmware for the LongBoard32, but I can't seem to get it working, and I keep encountering errors.
So far, I have cr…
-
Hello
As I wrote on the forum, I interesting in your code, because you take into account different types of addresses for chips of different sizes. Oddly enough, most similar libraries do not have th…
-
I just cloned the project and tried to compile it using ESP IDF 4.3.6.
All is well,but grblHAL_AP can't be found,I don't know what I did wrong.
This is my_machine.h.
Thanks for your help!
/*
…