-
Using the latest iteration of the driver I have some new problems. Firstly, if I don't actively use `performance_mode=off` I can't get KB backlight to work.
```
[ 528.147305] samsung_galaxybook:…
-
I don't think this is a case of bad corsair naming (at least I hope not) driver in lsusb is usbhid.
```
$ sudo liquidctl list --debug
[DEBUG] (cli) (main): version: liquidctl v1.8.1
[DEBUG] (cli…
-
* Are you using the latest driver?
Yes
* Are you using the latest EVDI version?
Yes, 1.14.7
* If you are using a DisplayLink device, have you checked 'troubleshooting'
on Displ…
-
Kernel: 6.12.0-rc7
BORE: 5.7.3
```
[ 906.235863] ------------[ cut here ]------------
[ 906.235867] rq->clock_update_flags < RQCF_ACT_SKIP
[ 906.235871] WARNING: CPU: 0 PID: 16856 at kernel/…
-
### Fill out information requested in this template, without doing so issue will be ignored & closed!
### Have you tried?
- [Searching through existing/closed issues](https://github.com/AdnanHod…
-
### Summary
I'm encountering an error with battery threshold settings on my Lenovo Yoga Slim 7 Pro X (14IAH7). The system fails to read battery threshold values, resulting in the error below.
##…
-
Some laptop or 2-in-1 devices also equipped with digitizer
Tablet or graphic tablet normally use USB port
but these tablet PCs usually have I2C HID digitizer devices.
(usually, they were detecte…
-
- Model: `gaze17`
- BIOS version: 2022-07-27_00cebe9
- EC version: 2022-07-27_00cebe9
The touch pad will sometime randomly stop responding. The EC toggle Fn+F1 does not bring function back. Power…
-
### System information
Type | Version/Name
--- | ---
Distribution Name |Debian
Distribution Version |Sid (Unstable)
Kernel Version |6.11.2-amd64
Architecture |x86_64
OpenZFS Version …
-
Hello,
I am on my FW16 and I installed the service via paru from AUR. It was installed correctly, my config was edited but it does not do anything. My brightness stays at the same level. However, the…