-
I'm wondering if there is support for the -> https://www.adafruit.com/product/3421 this Breakout board has LRCL, DOUT and BCLK
-
I'm trying to read data from the SPH0645LM4H.
The output received is :
```
f8d98000
f8d74000
f8d54000
f8e84000
f8e60000
f8e50000
f8e24000
f8e2c000
f8e48000
f8dfc000
f8e0c000
f91ac0…
-
### The problem
I am using esp32-s3-devkitc-1 connected to INMP441 Microphone and MAX98357A Audio Amplifier.
I am using the esp-idf to implement voice assistant with micro wake word.
Th emicrophone…
-
Hello, I tried to add this component to my voice_assistant, but get many warnings:
```
03:43:45 | [W] | [component:170] | Component i2s_audio.microphone cleared Warning flag
03:43:45 | [W] | [co…
-
My respect! You have this great project: https://0110.be/posts/ESP32_I2S_WiFi_Microphone , and I would like to ask if it is possible to do continuous reading of a UDP microphone in python? The code be…
-
Hi,
I have WS32-ETH01 board im trying to use it as VoiceAssistant throught PCM5102 DAC
This board support i2s audio?
Its working on esp32-wroom but not o eth01 module, the leds on eth port turn o…
-
### The problem
When installing the YAML i get these errors below regarding microphone and speakers. Only on ESP32-S3 devboard. Microphone is not working. "Same" code on ESP32 devboard works.
``…
-
### What happened?
**3.5mm audio jack & microphone** do not work
Though these hardware works in `mainline` kernel 6.6.4 as [mentioned here](https://github.com/defencedog/orangepi3b_v2.1/tree/main/…
-
I want to use a routine to read data from digital microphone and save it to sd card, but the routine uses chip reading microphone inside, my current microphone is directly i2s directly read 24bit raw …
-
Most gadget data seems normal but the sound level in a quiet room always stays at 65 dBc. The dB LED seem to respond to loud sounds normally.
Quiet: Phone 30 dB Gadget 65 dBc
Music: Ph…