-
Indoor air quality data for the BME 680 sensor.
0-500
![Image](https://github.com/meshtastic/design/assets/1795163/fdf33cd8-c83f-4eb0-8754-2b4f79237631)
![Image](https://github.com/meshtastic/desig…
-
I have a newer PDA panel that has some support. If I patch out this check below I start seeing iAQ Touch interactions. I was going to look into it and see if I could make it more functional.
@sfe…
-
Hello,
I have been using Paxcounter for quite a while. Today I connected the BME680 for the first time. It is very nice that it sends the IAQ value.
Is it possible to show the IAQ status by LEDs. Fo…
-
Hello Timothy,
I´ve been running your BSEC Conduit for quite a while now and it´s working stable.
However, the IAQ returned by it to home assistant is always 0.0
Have you had this problem as …
-
Add service to model gas reported by bme680
don't report iaq
-
Question: Why does `REF_BIAS` exist? Do we need it? Or can we get rid of it?
Background:
1. Trace IR code is represented as an array in memory.
2. The array includes two different things: instr…
-
**Describe the problem you have/What new integration you would like**
Support for the customised BME688 algorithm that is learned from the dev-board and then put through the Bosch ML software t…
-
### The problem
I have tried it with both esphome 2023.4.0 and 2023.5.0-dev.
If I set `framework: esp-idf` I can't compile it and it shows error `This feature is only available with frameworks ['a…
-
### The problem
Device is schown online in esphome, but I cannot connect wirless for logging.
It has been working fine until I updated it today with esphome 2022.2.2 and 2022.2.3
### Which vers…
-
Mast likely due to this breaking change:
PMSx003 add relevant device and state classes to default config [esphome#5633](https://github.com/esphome/esphome/pull/5633) by [@wheimbigner](https://github…
Dinth updated
1 month ago