-
I noticed a comment in the readme to hit you up here in regards to implementing icm-20948 sensor. Not sure if this is the place to mention it. I have a few of these sensors laying around and would lov…
-
Please tell me, what will it be necessary to do to seal the work of EDTracker with the ICM-20948 sensor (is it positioned as a replacement for MPU-9250)? Is it possible?
-
Just a question:
have you ever tested Invensense latest 9DOF chip, ICM-20948, as the sensor for Ultimate Fusion board? One would expect that it could give better performance than 9250, but it would b…
-
hi, I'm trying to read quaternions data from ICM 20948 and as i checked w in quaternions is between -1, 1 but when i rotated imu, quat_w was between 0 and 1. How can i get negative quat_w from imu?
-
Hi,
I am facing a problem in icm 20948 with msp430fr5994 by using int .i set a threshold values so that onece when my threshold values is cross i should get int but here it is not happening like th…
-
**Is this request related to a missing driver support for a particular hardware platform, SoC or board? Please describe.**
I need driver support for [ICM-20948](https://invensense.tdk.com/products/mo…
rexut updated
3 months ago
-
Hi,
I am using ICM-20948 by TDK InvenSense, which has on board digital motion processing unit. My host processor is MediaTek MT-2523G.
InvenSense provides DMP firmware, that has to be programed on D…
zq649 updated
5 years ago
-
Is this viable?
-
E:\Tarun Karak\Energia\Energia_software\energia-1.8.7E21\libraries\SparkFun_9DoF_IMU_Breakout___ICM_20948___Arduino_Library-1.2.7\src/util/ICM_20948_DMP.h:548:17: error: expected unqualified-id before…
-
[Product page](https://invensense.tdk.com/products/motion-tracking/9-axis/icm-20948/)
[Datasheet](https://3cfeqx1hf82y3xcoull08ihx-wpengine.netdna-ssl.com/wp-content/uploads/2021/07/DS-000189-ICM-209…