-
**Describe the bug**
my motherboard lighting shows up in iCue Ambilight but does not follow the program's lighting; instead keeps following the lighting of iCue instead.
**Please check that you ha…
-
Program keeps a wakelock on and will not allow displays to turn off or device to sleep
**To Reproduce**
Steps to reproduce the behavior:
1. Open program
4. Let device idle until sleep power time…
-
My Asus Strix RTX 2060 is not getting controlled by the Software, even if it shows up in the Devices List and my 2 Vengeance RGB (non Pro) dont even show up.
Anyway, the Node Pros are working perfe…
ghost updated
2 years ago
-
**Describe the bug**
Not working with (Not sure what devices are supported
1. Corsair Hydro H150i Pro RGB - if I disable this device in Layout then my Lighting Node Pros (2) start working
2. AS…
-
On initial install the Lightning Node Pro and H100i SE Platinum seem to work okay, but after I edit their layout they stop replicating the screen and freeze on the last color seen. Other components I …
-
**Device Name:** Corsair LS100 light strips
**Device Website:** https://www.corsair.com/us/en/Categories/Products/Accessories-%7C-Parts/iCUE-CONTROLLERS/iCUE-LS100-Smart-Lighting-Strip-Starter-…
-
**Describe the bug**
The ambient lighting is not working on my Corsair Dominator Platinium although they appear in the settings of the software.
I activated full software control for the RAM in ICUE…
-
Hello,
I installed and uninstalled 5.11.2.22 and .23, manually and with "install updates automatically", after uninstalling the original Prismatik software. I am using Adalight for 96 ws1812b leds co…
-
Hello! I use the Arduino Micro with LS100. Admittedly, I had original LS100s before, but they were too dark for me.
I have the 2812b and cut it to 2x27 + 2x15. What doesn't explain to me is the follo…
-
I made three different ones. LT100, LS100 and NODE PRO all three are visible in iCUE, but if I make another LT or LS, only one is visible, although both are present in the system, this is visible on c…