-
Any idea what it would take to allow this to work with the esp-idf framework? I'm trying to run this on an M5 Stamp C3U (an ESP32-C3 variant), but only the esp-idf framework supports the esp32-c3 boar…
-
To move the desk with millimeter precision, I created a service, since moving the cover with float values doesn't seem to work with Home Assistant directly.
```
api:
password: XXX
services:
…
-
Great work, I love having my desk in Home Assistant (and HomeKit) and it works really good.
I have one issue: If I click the up or down arrow and then interrupt the movement with the manual control…
bahlo updated
2 years ago
-
I must use version 1.2.2 in order to avoi dconnection/disconnection loop but while moving the height sensor doesn't update unless i press the stop button for the cover.
Here is the log
```
[19:39…
-
Hey, I copy-pasted the config and it doesn't work - logs/config below.
Also, ESP connects to the desk only after holding the BT button on the controller - phone app can reconnect after disconnecting.…
-
I am using an Linak DPG1C Controller with my desk which worked fine at first. After some time the controls got unresponsive but all sensor values appeared correctly. If i move the desk manually, all v…
-
Hi @mitsuhiko,
thanks for sharing this greattool. I am trying to set this up under Mac OS 10.15.4 with a new idasen desk (which was already paired with the smartphone app).
However, the `idasen-…
-
Dear Daniel,
Would you have any idea about the following error. I am running the app on a windows 10 host.
![image](https://github.com/danieldesrochers/idasen-ui/assets/56947652/5b5fd0c1-52d8-4…
-
It would be great if it could support LINAK controllers, these are OEMed to many desk manufacturers and used an RJ45 connection. My IKEA desk is LINAK.
I will most likely buy a device from you when…
-
Not sure if this the same issue as #25 or not but it looks the ESP32 connects briefly to the desk but drops connection soon after. While connected I am unable to move the desk.
Running controller v2.…