-
When designing the IGMP Proxy model, I feel it needs adding if-feature in import stmt and must stmt. But it doesn't support now.
The interface which enabling IGMP proxy should not be configured PIM…
-
I often find that when the USG has to restart the IGMP proxy does not seem to start correctly and the TV box does not then connect.
This usually happens after a power cut when I am not home and the…
-
As of 8.0.24 - there are 2 check boxes to do all the setup for you...
IGMP snooping, and IGMP proxy and now check boxes.
I only did them on my default network and my telus optic boxes started w…
-
I have been experiencing some issues with an IGMP-Proxy process crashing and causing IPTV streams to freeze and result in the error "Foutmelding: zender niet beschikbaar".
I have been analysing the…
-
### What is your ISP? (if relevant)
KPN
### Diagnostic Information
```
root@UniFiUXG-Lite:~# udm-iptv-diag
Please share the following output with the developers:
=== Configuration ===
WAN Inter…
-
```
What steps will reproduce the problem?
1. New firmware.
2. Reset to factory defaults.
3. WAN is DHCP.
When I enable IGMP Proxy the WAN will not renew the ip number when the lease is
expired. Whe…
-
Dear authors:
I have a problem when deploy pimd router in a vm. Could you please give some advice to fix?
Thanks in advance.
My topo looks link this:
physical router Host (linux…
-
Hello and thank you for this igmp/mld proxy code
I run some static code analysis on it and I would like to share somes results with you
1) input.c mcast_recv_igmp() => unreachable code : **else…
-
I need to configure my router as a downstream with igmpv3, currently igmpproxy builds igmp
query membership message by:
{code}
static void buildIgmp(uint32_t src, uint32_t dst, int type, int code…
-
Hi,
I use IGMP Proxy for connecting to my ISP's television service. This works fine for all normal and HD channels but the UltraHD channels that gets presented shows corruption in the stream.
Wh…
TheBR updated
6 years ago