-
Hi, is it possible to show IIO devices in sensors output?
Example, I2C, BME280, using kernel module `bmp280` on 0x76. Kernel: `6.1.0-rpi7-rpi-2712`, `sensors version 3.6.0 with libsensors version 3…
-
When un-docking the AYANEO 2S I noticed this error pop up.
```
[2024-05-20T02:09:44Z ERROR inputplumber::input::source::iio::iio_imu] Error running IIO Driver: Nix(ETIMEDOUT)
[2024-05-20T02:09:44…
-
Hi,
I'm using LIS2DUX12 accelerometer in a Linux environment with kernel version 5.10 and I'm testing event monitoring with `iio_event_monitor` tool. I managed to verify the functionality of a few ev…
-
Hi,
I'm porting the `asm330lhhxg1` on my embedded system device(Linux/arm 4.9.257). I am attempting to use the IIO buffer to continuously read data at its `sampling_frequency`. However, the process…
-
### Library name
libiio
### Library description
A cross platform library for interfacing with local and remote Linux IIO devices
### Source repository URL
https://github.com/analogdevicesinc/libi…
-
Hi ,
I am currently working on porting two sensors, the asm330lhhxg1 and lsm6dsox, to my platform.
However, I have no idea how to stabilize the sensor data and achieve the frequency in Hz as spec…
-
This will be useful on tablets and phones to test for accelerometers, compasses, quaternion sensors, etc.
In particular, accelerometers will behave differently if they have a "trigger" or not, if the…
-
I have been facing the following issue since 3 months, on cloning the analog devices github links when building petalinux project. One of these types of errors is as follows:
_ERROR: libad9361-iio-…
-
The section "How to test befor install"
> Run from a terminal sudo watch cat /sys/bus/acpi/devices/ACPI0008\:00/iio\:device0/in_illuminance_raw and check that number is changing (try close the sens…
-
I don't own one of these tablets but was looking at them, and saw that there's apparently no accelerarometer support. Has just iio-sensor-proxy been tested, or also something more modern like [rot8](h…