-
Is there a version of this library for the Arduino Due board and the 3.5"TFT?. I get a compile error:
In file included from C:\test\libraries\UTFT-master\UTFT.cpp:83:0:
C:\test\libraries\UTFT-master\…
-
Hi
Every time I try to clean build my project, I am flooded with these warnings:
```
/home/pi/Arduino/libraries/MCUFRIEND_kbv/MCUFRIEND_kbv.cpp: In member function 'uint16_t MCUFRIEND_kbv::readRe…
-
MEGA 2560 board with 3.5" TFT LCD Shield driver ili9481 no touch screen. User_setup.h uncommented for #define ILI9481. Sketch uploading successfully. Serial monitor on and displaying test data but scr…
-
work
Flash_Jpg_DMA.ino
view bgr to rgb
TFT_eSPI\TFT_Drivers\ST7789_Init.h
code
```c++
config
#define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
or
#define TFT_RGB_ORDER TFT…
-
All examples fail to compile with the error:
UTouch_Calibration:34: error: 'NIC35WS' was not declared in this scope
Still fails if I change the line to: ILI9327_8
UTFT myGLCD(ILI9327_8,38,39,40,4…
-
Hi daumemo,
I have the same display with the same FT6236U based chip. However in your example script, the left, right and top side of the screen is not working correctly. If I slide on the edges the…
-
Hi,
I tried to flash (with ESP-Flasher-Windows-x64) the homepoint_aztouchmod_full.bin to my ESP32-WROOM.
This is the Log:
Using 'COM4' as serial port.
Connecting....
Detecting chip type... ESP…
-
I use one of the samples (Local custom font) and have slightly modified setup to be (after including WiFi.h):
```
void setup(void) {
Serial.begin(115200);
tft.begin();
tft.setRota…
-
There seems to be no power (3.5V/5V) on the USB ports. Is there a special setting to activate the power on USB ports?
-
Using a TTGO T-Display (and having activated that option in TFT-eSPI), I got a display problem: only part of the display is used, and with the wrong rotation. I tried changing it without success (only…