-
Hi @will127534 ,
thanks for cool project! I intend to use the sensor as well :-)
If you want I can upstream the sensors into the Kicad library so they could be used also by other projects.
I ma…
-
## Description:
According to the camera's specification (**Sony IMX283**), after certain registers are written, there needs to be a pause of a few milliseconds before proceeding to the next set of re…
-
### Start with the `why`:
For low-light color and long-range high-quality digital zoom applications, it is beneficial to have a large image sensor with large pixels. The IMX283 provides both, with…
-
Hi,
Could you please implement support for the IMX283 camera.
There is working implementation for theallsky soft, so maybe it would be easy to do
https://github.com/AllskyTeam/allsky/issues/3935
T…
-
**Describe the bug**
On the IMX 283 branch with an IMX462 camera, Yolov6n custom models run at a very low frame rate when the ColorCamera node is set to certain FPS values, such as 15 FPS. The same b…
-
### Camera model
OneInchEye IMX283
### Operating System
Bookworm
### Allsky version
v2023.05.01_05
### Pi and amount of memory (512 MB, 1, 2, 4, or 8 GB)
RPI5 8GB
### Bug Descr…
-
This is will be augmented post, featuring present issues and recently closed ones.
Upon a fix, a comment will be made to this post.
Recognized issues are brought forward when both `main` & `develop`…
-
I am building one particular wheel related to Arducam 20MP IMX283 Camera module.
I am getting this error while trying to install that wheel
```
CMake Error in CMakeLists.txt:
Importe…
-
Hi, I am working on arducam with NVIDIA Jetson. During initial setup stage we are building the requriments by following the
arducam_imx283 branch of depthai-experiments repos.
[ depthai-experimen…
-
Hi @Erol444 ,
After the setup issue, I am stuck with another one.
When I run **main.py** script (under gen2-color-isp-raw) to test & capture images with **arducam imx283.**
Even tried increasin…