-
There may be an issue when detaching from an IMXRT1062.
There is a report of failure to issue `kill` when attached to an IMXRT1062 on Farpatch: https://github.com/farpatch/farpatch/issues/71
Spe…
xobs updated
6 months ago
-
If the code is built for EEPROM and you boot without the EEPROM attached, the program does not respond to the USB serial port and appears to be hung.
This was an issue because the EEPROM is located…
-
Both Web Builder and Arduino IDE these settings fail to compile.
{"driver":"iMXRT1062","URL":"https://github.com/grblHAL/iMXRT1062","board":"BOARD_T41U5XBB",
"symbols":["USB_SERIAL_CDC=1","N_AXIS=…
-
I have my home built laser running with the iMXRT1062 Driver. I wanted to try out PPI, but not sure how to get it going in light burn. Would it be possible to try your version of the iosender for your…
-
Thank you for this great tool!
Teensy 4.0 support has been added in https://github.com/PaulStoffregen/teensy_loader_cli/commit/900a2bf56ed8f0627127dadfde8742e9810eff63
Installing `teensy_loader_…
-
Calling `sd.begin()` on a Teensy 4.1 without a card present appears to take 2 seconds before it times out and the call returns. Compare this to a Teensy 3.5 where if no card is inserted then the call …
-
Salve, ulitizzo grblhal con teensy 4.1 (iMXRT1062) e gestisco tutto con Lightburn e connessione ethernet. tutto funziona perfettamente. Oggi installo LaserGrbl, mi connetto ethernet, leggo perfettamen…
-
### Describe the problem
Suppose I have the Teensy board types installed, like 1.58.1, and I did a few builds, and then decide I wish to try something out on the current beta build 0.59.2. Run a te…
-
Hi
Thanks for developing the RGB status plugin, its a great addition. Shiny status lights FTW!
I'm trying to use your plugin in conjunction with 4 other aux outs which control relays for an ATC.…
-
I tried going through the instructions for building grblHAL for your breakout board from source and am having some difficulty as there's no main folder in grbl-HALmaster/drivers/IMXRT1062/main. Are th…