-
## Introduction
Writing good tests is difficult enough and making sure that there are good common utilities is paramount. With the addition of the `gtest` twister harness we've enabled the use of i…
-
**Describe the bug**
The INA23x driver does not allow setting of a rshunt value less than 1mOhm.
**To Reproduce**
1. Try to set the rshunt-milliohms to in an overlay for MIMXRT1062_FMURT6 board…
-
```
rauc install http://10.0.0.10/bundles/update.raucb
installing
0% Installing
0% Determining slot states
20% Determining slot states done.
20% Checking bundle
20% Verifying signature
…
-
I see that BST is implemented in betaflight. Is the current sensor on the TBS Powercube supported? I can't get it working if so. Love some help getting this working if it is indeed supported. I am try…
DaTwo updated
2 years ago
-
Hello! I might be missing something here, but it seems like the PWRMON_IO_xxx functions are missing from this repo? The functions are defined in the header file but not in the C file and I can't find …
Laxen updated
3 years ago
-
Split out from: https://github.com/Open-CMSIS-Pack/Open-CMSIS-Pack/issues/10
links to: https://github.com/Open-CMSIS-Pack/Open-CMSIS-Pack/issues/21
Requires a tool that can:
- search for componen…
-
Any chance we could get support for the ina230 current monitor on the tbs powercube (COLIBRI RACE flight control)? Its connected to the i2c bus via the BST pins on the stacking header.
I am more than…
DaTwo updated
7 years ago