-
```
Ingenic has posted a new kernel patch today. Just figured Id open an issue
since it may have some useful changes.
ftp://ftp.ingenic.cn/3sw/01linux/02kernel/linux-2.6.24/linux-2.6.24.3-jz-2009090…
-
```
Ingenic has posted a new kernel patch today. Just figured Id open an issue
since it may have some useful changes.
ftp://ftp.ingenic.cn/3sw/01linux/02kernel/linux-2.6.24/linux-2.6.24.3-jz-2009090…
-
See [gnome-control-center#2727](https://gitlab.gnome.org/GNOME/gnome-control-center/-/issues/2727), the Lenovo Yoga Book 9i has two built-in identical tablets currently listed as
```
- name: 'INGE…
whot updated
7 months ago
-
I've got a couple v2 cams that are borked. They partially boot, but then hang. I think the boot loader is messed up. I wanted to try just re-flashing the bootloader from a serial console connection…
-
I saw that there is a sand clock on the X2000 USB serial port, does it means it does not have those capabilities?
Context: I own a Creality K1 3d printer, which uses an modified board that runs on …
-
```
Ingenic has posted a new kernel patch today. Just figured Id open an issue
since it may have some useful changes.
ftp://ftp.ingenic.cn/3sw/01linux/02kernel/linux-2.6.24/linux-2.6.24.3-jz-2009090…
-
Where is the .ingenic file that is needed to recover the K1?
-
Thought I try my luck asking here. Seems like the only place where newer ingenic boards are discussed at all.
I've been playing with with the X2000E SoC from the creality K1 printer, got uboot/spl …
-
I have jareth03w camera.
I did dump fullflash of stock fw.
Flashed the openipc for T21 and no ethernet is found. No ethernet is found on uboot either.
-
My camera have telnet 23 open port.
I can connet to camera telnet with user root without pasword.
uname -a
[root@Ingenic-g1_1:www]# uname -a
Linux Ingenic-g1_1 3.10.14 #36 PREEMPT Mon Jul 31 1…