-
### Feedback
hello, a have sensor IBS-TH2/P01B INKBIRD, but inegration very bad working ... no signal on bluetooth...
but on my phone in application sensor very good getting connected and loading h…
-
### The problem
I had a P01B that was working in HA but the sensor itself failed so I removed it from HA
I replaced the sensor and tried to reinstall in HA but the Inkbird integration doesn't see it…
-
### The problem
I have a Home Assistant Docker setup with 3 Bluetooth proxies (1x ESP Home, 2x Shelly Plug S). In my setup I have several Bluetooth temperature and humidity sensors (manufacturers: Xi…
-
### The problem
New devices discovered that are not nee
### What version of Home Assistant Core has the issue?
Not sure. Been an issue for awhile
### What was the last working version of Home Ass…
-
**What kind of device or service you would like to see an adapter for?**
Inkbrid Bluetooth Grillthermometer
**Are other libraries for an integration available?**
Ich selbst habe bisher dies erfol…
-
Would you expect this to work with other Inkbird devices like the Inkbird IBS-P01B?
-
Hi,
is it possible to add support for an Inkbird ITH-20R for esp32 with cc1101 i am not sure how to add additional decoders. a link for it working with rlt_433 is , https://github.com/ehagan/rtl_4…
-
### The problem
Hi guys, i try to pair my Inkbird IBBQ-4T with the Tuya integration but it is only shown as a heater:
![image](https://github.com/home-assistant/core/assets/35572059/bf527d55-eab7-…
-
Good morning,
Thank you for your work, do you think you can make the plugin compatible with the IBS-M2 connected module?
THANKS
-
Hi, can You help integrate or more add devices for Tuya V2?
In basic interaction of Tuya (no v2)
I need divided temperature in configuration and all work like a charm.
device add like climate to…