-
**Describe the problem you have/What new integration you would like**
I would like support for the Inkplate 6Color's display. It seems largely similar to the Inkplate 6 and 10 which are already…
-
I can't get either the 2.0.0 or 2.0.1 release for the Inkplate 6 Plus to start. This is using the "Soldered" variant of the device (https://soldered.com/product/soldered-inkplate-6plus-with-enclosure-…
-
Inkplate_6
When plugged into usb power, the screen refreshes once every 5 or 6 seconds.
I can't quite figure out why.
Attached are the logs:
https://gist.github.com/cromulus/b39960e30b028223…
-
### The problem
After installing the update, the display (inkplate 6) began to fully refresh every 5 seconds. It was configured like this:
- platform: inkplate6
id: inkplate_display
greyscal…
-
How i could change the build flag „ARDUINO_ESP32DEV“ to „ARDUINO_INKPLATE10“ in platformIO?
-
Hello,
Is there a special kind of microSD card required for Inkplate 10? I have tried a [32gb SDXC](https://www.amazon.com/dp/B09WB35BXS) and a [2gb SD card](https://www.amazon.com/dp/B001BNNZXO) in …
-
Hi Folks,
FYI, I have a portable Arduino IDE install set for this board, but it is failing.
**I have not compiled this in at least two years.**
OpenWeather just deprecated their API, thus a recom…
-
Version: PlatformIO IDE V2.2.1
Editor: VSCode
OS: Linux
Hello, it would be beneficial that the following platformio.ini would merge options, such that in my (over simplified) example below, for […
-
### The problem
I have 3 InkPlate6 displays running, after upgrading to ESPHome version 2023.7.0 the full_update_every is ignored. Before updating i was running with partial update every 10s and full…
-
Hi, how you get inkplate as an option as display? Getting Platform not found 'display
.inkplate'
display:
- platform: inkplate ??
id: inkplate_display
greyscale: false
partial_updating: fa…