-
There exist a 4GB version of the Innova 2 Flex with MT40A512M16 DDR4 ICs.
So there should be Bitstreams, Documentation and Project files provided.
- [ ] Document the difference of the physical boa…
-
I have one innova2 flex board, when I use the innova2_flex_app enable the jtag access, but actually the jtag scan is failed.
```
open_hw_target
INFO: [Labtoolstcl 44-466] Opening hw_target localhos…
-
Hello, someone handed me a lenovo-made innova2. It is missing the connect-x device.
Should I try unconventional methods on it to flash another image than the supplied by lenovo so development could …
-
I've been able to follow your tutorial and build a bitstream with and have it show up when I do lspci and now I'm trying to remove and reenumerate the FPGA so I can flash a new bitstream without havin…
-
Thanks for such detailed documentation! I just started playing around a bit with the card. Mine arrived with no firmware and lspci shows only one device `MT28800 Family [ConnectX-5 Flash Recovery]`. T…
-
I tried to use `mixup` to fetch the latest firmware, but got the following output
```
Device #4:
----------
Device Type: ConnectX5
Part Number: MNV303212A-ADL_Ax
Description:…
-
Hi,
I am trying to use the driver. I successfully make the module however I receive the following error when try to run _**make install**_
Makefile:10: XVC_FLAGS: .
make -C /lib/modules/4.15.0-…
-
A JTAG register to BSCAN2 path fails to meet timing requirements and is the only timing issue. `xsdb` cannot load any files larger than the bare-metal boot.elf but I am able to send and retrieve 1GB o…
mwrnd updated
2 years ago
-
### System Health details
## System Information
version | core-2022.11.4
-- | --
installation_type | Home Assistant Core
dev | false
hassio | false
docker | false
user | u0_a238
virtualenv …