-
Arduino 8E1 format is 8 bits of data, one even check, one stop, a total of 10 bits of data.
The traditional CH32 and STM32 are 7-bit data one-bit check, so there is one less.
To solve this problem…
4061N updated
3 weeks ago
-
The ucglib code calls `SPI.beginTransaction` only at startup, and `SPI.endTransaction` only at termination. This causes problems when there are any other SPI devices in use because those device drive…
-
BPO | [31387](https://bugs.python.org/issue31387)
--- | :---
Nosy | @gpshead, @ncoghlan, @vstinner, @giampaolo, @njsmith, @1st1, @ryanhiebert, @aeros
Dependencies | bpo-29988: with statements are not …
-
libopencm3 should have a function that takes a certain number of clock cycles. This could be used to control timing in non-interrupt-driven programs (like `miniblink`) or when very short delays, possi…
-
Looking at the [Overview](https://github.com/NOP0/rustmatic/blob/master/Overview.png) diagram, it sounds like the core of the PLC runtime would be something like this:
```rust
while running {
r…
-
The KERNAL EDITOR assumes it owns the VERA I/O registers:
On boot, it sets up VERA_CTRL.ADDRSEL to enable VERA_DATA0, and any screen output as well as the blinking of the cursor will assume VERA_CT…
-
An "interesting implementation" has crept into core-v-verif and it affects how interrupts to the DUT are asserted and de-asserted by the verification environment. This affect all E40 cores and the E2…
-
JOSS supervisor is here:
https://www.rand.org/pubs/research_memoranda/RM5437.html
-
usb.Task() has a 5 second blocking delay in the KeyboardController and
MouseController examples. This makes it hard to use USB host with
other devices that need regular polling. For example, if data i…
bbx10 updated
4 years ago
-
1. Summary
This project requires to design and implement a simulation of an operating system. Students are expected to prepare a computer program that will serve as a simulator of loading and executi…