-
Hi,
First, one of the best Home Assistant addons out there for me.
I am using a Deye inverter SUN-8K-SG01LP1
I was wondering if there is a way to control anything on the inverter, as in chang…
-
Hi, hoping to pick your wonderful brains again with a query about setting/reading inverter options via a direct request.
I'm using grott and home assistant and it's working brilliantly. I know tha…
-
I’m controlling my 5kW hybrid inverter using home assistant. I can control most inverter parameters with the GivTCP addon, including the DC discharge times. But I struggle to control the DC Discharge …
-
Greetings. I have an inverter, which I finally control (switch operating modes) and read data, but I don't read everything I need...
yesterday i connected an extra string to my inverter and now i hav…
-
### Describe the bug
We are running 2x SolaX X3-Ultra 30K inverters in master-slave parallel mode. Each inverter has a maximum power of 30 kW, but by default I can only set 2 500 as a maximum _Expo…
-
Hallo @ Freunde der Sonne :-)
Situation:
2x PV Module je 400w
1x Battery Marstek B2500-D (2.240wh)
1x Hoymiles HM-600
Grundverbrauch (50Wh min.)
HoymilesZeroExport mit AHOY(Hoymiles), Hichi …
-
**Describe the bug**
Fresh install. First run. Giving error in Log File
Inverter_limit set to 11500, but I now don't think it is relevant.
2024-08-20 22:01:06.652055: Reserve min: 4.0% Battery_m…
-
# What happened?
Basis data are shown - Jipiiie!
But not any battery information - a comms issue to the battery or not supported anyway?
# Stick type
What Stick type are you using?
- Shine X
…
-
Im trying to run the examples single_inverter_current_control_safe_opt.py and single_inverter_voltage_current_control_safe_opt.py.
Both have an issue with the reward function.
Specifically, the l…
-
I need to control several inverters. But it does not work. Only one inverter works.
But Solarman integration can work with three inverters.