-
Hi,
I'm trying to use the ip5306 component, but it doesn't seem to work?
**Config**:
i2c:
- id: bus_a
sda: 14
scl: 13
frequency: 400kHz
scan: true
ip5306:
bat…
-
The reference implementation in http://www.injoinic.com/wwwroot/uploads/files/20200221/0405f23c247a34d3990ae100c8b20a27.pdf shows the resistor between BAT and the battery connector, but https://github…
-
Hi :
I am tring to get battery info by IP5306_I2C , but something going wrong :
Arduino IED 1.8.15 and VSCODE
board esp8266 and. LGT8F328P the same compile error
/Users/xiaoning/Documents…
-
Modules using the IP5310: https://www.aliexpress.com/item/1005005024692162.html
Library/example code to communicate via I2C to this charger/powerbank IC: https://github.com/bheesma-10/IP5306_I2C
lis…
-
seems there is an incongruence in the schematic for power management of M5stick C
https://github.com/m5stack/M5-Schematic/blob/master/Core/m5stick/Power.pdf
the schema reports IP5306 IC while …
-
When powered by a battery, the IP5306 restarts when the SIM 800 DC-DC power is turned on. According to my observations with the help of an analyzer and an oscilloscope, the reset occurs from overcurre…
-
### The problem
When you enable the camera on the I2C bus the scan will detect all the I2C devices yet only the Camera seems to optimizes the bus and no other devices respond.
ssieb pointed to t…
-
Hi,
I wonder do you know what battery should be connected to this board.
I have tried a 3.7v lipo but it does not appear to work.
Thanks,
Mark
-
I have a SIM800L TTGO TCall. I have chosen Thingsboard IoT platform for a project. The example just doesn't work for me :(
I have tested Blynk GSM example and it works fine. I have tested thingsboar…
-
I'm trying to install homeThing to a brand new m5Stack FIRE device. When I try to validate the configuration in ESPHome Dashboard, I'm getting a failure: "Unable to find action with the name 'homethin…