-
I decided to try to raise nut for the subject, but alas it doesn’t work, and the application was written for Windows in 2018.
Could you maybe advance me a little?
```
server@debian:/etc/nut$ nu…
-
Hi all,
We are facing issue with ipmid and netipmid . Both are exiting with segmenation fault. We are using version 2.12.
**Please see error logs for reference:**
root@aaaa:/etc/eip# journalctl…
-
We (IBM) recently wanted to disable network IPMI by default on our systems. But, we wanted the ability via Redfish->bmcweb->service-config-manager to allow our users to enable it if they so wish.
W…
-
When building `ipmitool` on HardenedBSD 14-CURRENT/amd64 with `-ftrivial-var-auto-init=zero`, the following command results in zero output from the system:
```
ipmitool -I lanplus -H IPv4_address_…
-
I am using phosphor-host-ipmid at `SRCREV = "a23af1206bc4c835516909c87c71be0e7428264c"` (this is slightly out of date), when I run `ipmitool` commands, such as `ipmitool sdr` or `ipmitool fru` on the …
-
on some hardware have such issue but not all
I meet the issue. because the ipmi-sensors execute slow and when there are multiple prometheus scape from the same ipmi-exporter. more and more process o…
-
Hi, just wanted to document the config that works with this [Forza FX-2200LCD](https://www.forzaups.com/products/internal/FX-2200LCD-eng/) UPS which I recently picked up due to the frequent power outa…
-
在cloudpod平台使用pxe方式纳管物理机时，输入ipmi的IP地址时提示未创建，但是我已经在子网内创建了相应网段的pxe类型的子网和物理机类型的子网，求解答
-
Hi,
A week ago I setup NUT Server on a Raspberry Pi 3 connected with USB to **Powerwalker VFI 1500 RMG PF1** UPS.
`nut-scanner` detected it like
```
[powerwalker]
driver = "nutdrv_qx"…
-
```
[root@an-a01n01 ~]# anvil-pcs-wrapper host auth an-a01n01 an-a01n02 -u hacluster -p 'super secret password'
Error: Unable to communicate with password
Error: Unable to communicate with secret
…