-
We need to implement a feature that allows users to enable or disable specific IPsec tunnels. This feature should provide the ability to manage tunnels for different firewalls and should include:
E…
-
Currently, the SPI value associated with an IPsec SA is populated across 3 maps.
1. The tunnel map
2. The node map
3. The IPcache
Ideally, we collapse the SPI value to only be populated in t…
-
While creating an IPSEC_TUNNEL DRG attachment type and configuring in the network_details the type as IPSEC_TUNNEL, we got an error on apply operation with "Error: unknown type 'IPSEC_TUNNEL' was spec…
-
When I run `terraform apply` with a `mist_device_gateway` on 0.1.36 configured like the following
```tf
resource "mist_device_gateway" "gateway_one" {
name = "gateway_one"
device_id = "…
-
Hello there,
Is there a way to configure an IPsec tunnel via yang?
Which yang models did you use to achieve this goal?
I can't find any correct model ...
PS: You should consider developing a…
-
Implement IPsec configuration via opn-cli from OPNsense API: https://docs.opnsense.org/development/api/core/ipsec.html
-
This is a request for enhancement (RFE).
**REQUEST**
Allow onboarding to create IPsec tunnels in both tunnel mode and interface mode.
**BACKGROUND**
A lot of customers already automate IPs…
-
Cisco CSR1000v
Cisco 8000v
resource "iosxe_interface_tunnel" "vti" {
name = 20
shutdown = false
ipv4_address = "hidden"
ipv4_address_mask …
-
0
down vote
favorite
I setup a site-to-site IPSec tunnel using OpensWan.
I noticed that there is always a delay of 15 sec betwenn the phase 1 and phase 2 as shown in this tcpdump. Does anybody know wh…
-
IPSec tunnels can be created but we're missing the key configuration parameter to be able to create the working tunnels as the phases details.
Needs to be reviewed and fixed.