-
Hello. I have been working on Jennic JN5148 and Jennisense for the last year. I have a star based network of sensors implemented yet, and some background information. I have tested my system with 4 se…
-
Hello forum.
I'm trying to run some simple tests with a slave sensor connected on the SPI bus with a master Jennic JN5148 micro controller. Master and slave are connected using VCC, GND, MISO, CS and…
-
Hello,
I have a Zigate USB, whose firmware I'm trying to upgrade:
I've tried different baudrates, but only 38400 seems applicable. All other values report : "Error setting baudrate"
Now, her…
-
Probably not only jenprog related.
Just for anybody else to confirm or close:
jenprog seems to work very unreliably on on a linux vm with 3.8 kernel.
`Linux precise64 3.8.0-19-generic #30~precise1-…
-
Dear,
I'm trying to use the jenprog with a devkit board for the JN5168. Ftdi drivers and utilities are working good (I can access the FTDI Model and ID with no problem), but the communication is brok…
-
Hello.
I want to test IPv6 communications between my PC host and a Jennic JN5148 mote
on the 6LowPAN network. I want to use a SLIP channel to exchange (send/receive)
information between mote and host…
-
Hello.
I'm working with a Jennic JN5148 on a jndevkit platform. I want to read lightlevel-sensor on the PCB board. To do that, I developed a very simple test (based on imu-serial.c).
# include "cont…
-
Tried to test the button example code on a 'sensor board' and no sensors are detected (printed the 'num_sensors' trhough the uart and it showed '0').
---
Well, I guess I just had to initialize the s…
-
./Sniff.py /dev/ttyUSB0 ne demarre pas:
```
root@Abeille:/var/www/JN516xSniffer/JN516xSniffer/wireshark_plugin# ./Sniff.py /dev/ttyUSB0
Traceback (most recent call last):
File "./Sniff.py", line…
-
Bonjour,
J'ai une pizigate v1 (je pense) installée sur une dietpi v.9. Je souhaiterais faire la mise à jour sur le dernier firmware Zigate V3.23 (opdm) ou (legacy);
J'ai l'erreur suivante :
```
…