-
Kibana version: 8.13.3
Elasticsearch version: 8.13.3
The following error message appears:
error.messageProcessor "grok" with tag "" in pipeline "logs-juniper_srx.log-1.21.0" failed with message…
-
**Describe the bug**
### In short:
When Packetfence issues a vlan change on a port (after registering/deregistering), the switch logs an error and the vlan won't be changed for the switch port. Afte…
-
Hi,
I'm trying to figure out if I'm going insane or I should open a case with Juniper.
I'm trying to get interface statistics using gnmic. Doing the following subscribe request results in **one*…
-
### The problem
Hello,
I see Memory monitor for Juniper device only collect Buffer for Line card.
Is it possible to monitor Buffer and Heap? Heap seems to be more important than Buffer
```
Sl…
-
Similar to #162 and #156 - using Hyperglass to query our MX960 for the most part results in a generic error message "Error connecting to $Location: No response."
The ping function **works** and ret…
-
load factory default 恢复出厂
# 进入配置模式
configure
# 设置主机名
set system host-name EX3300-Switch
# 设置根密码
set system root-authentication plain-text-password
New password: [输入新密码]
Retype new passw…
-
We need to test that we can use EVPN VXLAN with non-Juniper hardware vendors such as Cisco and Arista.
-
Hi
I have this macvlan network defined:
[
{
"Name": "newnet",
"Id": "bd967f83ad36ebfc5a6d28bc507975c43e921cff25c004caf31f445f355e56d2",
"Created": "2024-06-08T10:44:…
-
End reliance on Juniper MX for edge?
- Mostly a problem with L2; irrelevant for L3 from your cloud
- Think MPLS interconnect
- May only be a small minority of the community that needs this
-
https://graphql-rust.github.io/
を読んでいきつつ、必要であればメモしていくためのチケット。