-
I've been trying to connect to my JVC LX-NZ30 projector via Home Assistant which seems to use this module. Was getting a generic connection message so I traced down to here and tried to run this modul…
-
I've been trying to connect to my JVC LX-NZ30 projector via Home Assistant. I've tried the HA included integration and the custom integration that uses this in the backend and both fail to connect.
…
-
### Description
Hello,
I got some situation that my 4GB Coral Development Board had a hard time to detect my USB storage device. Due to my attention, this situation happens more and more on low te…
-
I get this error every time
![image](https://github.com/libretiny-eu/libretiny/assets/112991367/d56ef907-381e-459f-bd53-f7716513e112)
```
esphome:
name: rf
bk72xx:
board: generic-bk…
-
Hi,
When i try t install a fresh burn img on my Cubieboard2 (A20) with the new X1 headless (VGA same pb), i have this (very long) log trace (take on ttyUSB) and the installation process don't finish …
-
I have used the master brach also tried with the ver 4.1.8 of my rtl8188ee device [My custom imx6 sabresd having the pcie to usb]. So the interface of the wifi device is usb. I installed the driver an…
-
I just did a dist-upgrade today and now I can no longer use python3. Any attempt to start the python interpreter immediately ends with "segmentation fault".
It did upgrade a bunch of packages that …
-
Using Kodi 18.5 on RPi 1.
When I freshly installed it on SD card all worked fine. Then I moved it to NFS using xbiancopy and it quits during auto-start with message: "NOTICE: Quitting due to POSIX …
-
https://vvviy.github.io/2018/09/17/nv_small-FPGA-Mapping-Workflow-II/
Keep self busy.
-
I just got my ROCK 64 with the jessie-openmediavault-rock64-0.6.25-193-arm64.img image from https://github.com/ayufan-rock64/linux-build/releases/tag/0.6.25
But the external hard (http://en.sharkoo…