-
### Steps To Reproduce
1. In PenPot's **editing mode** (not the sharing preview mode),
in Firefox (or GNOME Web) on a laptop, on Wayland,
open a large mockup (ex: 2200 x 4600 pixels) with lot…
-
I successfully boot powermonkey.efi to undervolt my cpu with parameter:
Core: -65mV
Ring (Cache): -65mV
my cpu is i5 8250U , it's a laptop CPU (KabyLake-R)
Secure Boot: Disable
Virtual: Enable
…
-
Using MADI or MCDI I get artifacts that look just like the ones reported here https://bugs.freedesktop.org/show_bug.cgi?id=79765 for SNB and IVB.
I used the same burosch test samples that are linked …
srehm updated
6 years ago
-
On Kabylake FSP sets CAP.SSS=0 when not at least one bit in SataPortsSpinUp is set. SataPortsSpinUp[x]=1 sets PxCMD.SUD=1.
Is there any reason FSP is disabling a CAP? IMHO it does not make any sens…
-
Has anybody information regarding this problem? We should push for a fix that is independent of the operating system.
-
Hello, I need help on my notebook i5-7300HQ, I'll try to apply KabyLake patch to DSDT but PCI0.LPCB.EC0.WRAM and PCI0.LPCB.EC0.ST9E doesn't exit. In the search of similar variables i found a method ca…
-
I've got two Gigabyte boards, z270 with i5-7600, and z170 with i7-6700k.
On both these boards memtest86+ 7.0.0 reports different IMC clock speeds and DDR4-datarate than the UEFI and memtest86.
I…
-
Hello,
I have an Asus UX430 (kabylake refresh) and it seems that I have a realtek alc-294 instead of realtek alc-295 mentionned in this repository.
I had troubles getting the jack output working (…
-
I still unable to get this ssdtPRGen work on the Kabylake processor.
> Last login: Wed Jun 7 21:45:03 on ttys000
> Jians-iMac:~ jianwei$ /Users/jianwei/Downloads/ssdtPRGen.sh-Beta/ssdtPRGen.sh
…
-
Am using your EFI (modified) for HP laptop 250 G5. Can boot Catalina through Sonoma 14.6 beta.
Have Skylake CPU and 520 graphics spoofed to Kabylake for Sonoma. Have to use kernel args cpus=1 in …