-
Files:
pi@raspberrypi:/opt/kamstrup $ ls
config.yaml daemon.py kamstrup_meter.py kamstrup_meter.pyc mqtt_handler.py
pi@raspberrypi:/opt/kamstrup $ pip install pyserial
Looking in indexes: …
-
**Describe the problem you have/What new integration you would like**
Like to get water flow metering from smart water meters with IR eye via hardware similar to [Home Assistant Glow](https:/…
Hedda updated
1 month ago
-
Can't get the script to work on nano:
'SWSERIAL_8N2' was not declared in this scope.
Seems like there is no configuration possible for sofwareserial, is there a different softwareserial libary …
-
### The request
Hi,
I just want to inform you that this integration works with the Kamstrup Multical 401.
Would be great if you could update this integration to work like the Kamstrup 401 integrati…
-
I get the following errors when uploading to esp32
```
INFO ESPHome 2024.6.4
INFO Reading configuration /config/esphome/kamstrup.yaml...
INFO Generating C++ source...
INFO Compiling app...
Proce…
-
Hi,
Have you had any success with getting the necessary information from the ESB to install https://doc.smart-me.com/products/kamstrup-module
Thanks,
Ian.
-
The HAN-port is located top left and the module is installed by pushing it in. There is a DIN-variant that has the HAN-port located to the left.
![Kamstrup_OMNIPOWER_3_phase](https://user-images.gi…
-
-
**Describe the problem you have/What new integration you would like**
Add support for the [Kamstrup omnipower energy meter](https://www.kamstrup.com/da-dk/elloesninger/intelligente-elmaalere/3-…
-
Hello everyone,
so a while I try to get my water meter in my smart home. The water meter is placed outside in a metal shaft 2 meters deep. Wifi reception is obviously bad but could be worked around…