-
## Current Behavior
When i try to enumerate devices on crossfire network, i get no responses from ERLS endpoint.
Most likely it doesnt respond or filter packets for some reason.
Broadcast messa…
-
I've tried to replicate this, but the new firmware from Flyduino does not allow access to the camera control function to work.
The video from Benjamin from Flyduino shows it does works. Take note,…
-
When can we expect an adaption to the new Kiss Firmware?
I love the OSD but I can not update due to the changed CRC.
Since v1.3-RC10:
"New kiss protocol CRC support (Kiss OSD should work fine, Th…
-
Hi i am using KISS if i drang an OSD file on the overlay tool it tells me this.
do you need some KISS *.osd files for development?
-
Hello there,
I just build my first wolf pdb setup with a brand new board and a Kiss FC V1. After updating all firmwares (Kiss on 1.3RC36 Stable and the latest OSD firmware) and do all settings (Dummy…
-
Setup:
KISSFCV2F7-1.3RC32e
Kiss 32A 32-bit ESCs, full telemetry
KISS_OSD 2.5
Micro MinimOSD+470uF cap
I am unable to get spinning prop icons only - I now realize this could be due to the teleme…
-
You mind if we rename "Dummy VTX" to "OSD sync"?
When Dummy VTX is selected, both KISS OSD and ImpulseOSD will sync VTX settings with the FC. Then you can also change channels on the VTX connected to…
-
One question :)
Is Tramp supported at the moment?
Im using Kiss CC and had to abandon OSD to make room for Tramp.. (Kiss FC has one serial port as well).
Is it possible to connect Tramp straight…
sz4dy updated
7 years ago
-
Hello everyone ...
As i want .. i have connected a miniOSD .. a GPS... and a GHOST reciever successfully at
Kiss CompactCtrl and Kiss V1
Thankfull the hard word of fedorcommander .. and th…
-
I am trying to setup Kiss LUA script for Taranis X9D+ with kiss FC v1.03 and Mr Steele PDB.
I have TBS Unify HV, PDB is soldered for 7v and I have smart audio running from Unify to Audio on the St…