-
Hi Juan,
I seem to be encountering a similar issue as Mark reported 2 years ago in the closed issue:
https://github.com/Infineon/TLV493D-A1B6-3DMagnetic-Sensor/issues/12#issuecomment-492615521
…
-
When trying the library with a '3D magnetic sensor 2GO' board, with example 'Cartasian_low_power' is always shows this in serial monitor:
![image](https://user-images.githubusercontent.com/18257076…
-
I chose the XMC2Go Board to flash the program. The Sensor does not get 3.3 Volts on the dedicated pin as probably port 15 is not set to HIGH.
https://github.com/Infineon/TLV493D-A1B6-3DMagnetic-Sen…
brato updated
3 years ago
-
Anyone got the examples in the repository to work?
I am using TLV493D-A1B6 MS2GO and TLV493D-A1B6-3DMagnetic-Sensor-1.0.3 library. The sensor reading is 0 for all the axis. When I used Infineon's …
-
On F25, figured the config doesn't work with the F25 packaged Arduino 1.6.4. Required upgrade to Arduino 1.8 to get it to find the compiler.
Then, JLink rpm installs to /opt which is not in the libra…