-
Hi Channel i am looking to use knx secure over RF can you suggest if support for the same is available along with any reference implementation example for the same.
Link for the product: https://wei…
-
I've set up Calimero Server on a raspberry pi with a tpuart board conneced.
My configuration is as following:
```xml
1.1.0
/dev/ttyAMA0
…
-
Ich habe eine neue IP Schnittstelle (MDT SCN-IP000.03) in Betrieb genommen und (aus Unwissenheit) "Sicher" in Betrieb genommen.
Anfänglich ging gar keine Kommunikation.
Ich musste erst "Secure Tunne…
-
Hi!
I get an "empty internal fsm queue due to inbound_DISCONNECT_REQUEST" info message every 10 minutes.
It is only an info message i know, but at the very same moment i get oflline. The "offline"-…
pesi- updated
3 weeks ago
-
**Is your feature request related to a problem? Please describe.**
The featurerequest is primary for use WLED via KNX Bus or better the Presets for KNX Group Addresses.
**Describe the solution …
-
It would be nice to support USB interfaces in addition to KNX/IP.
Next to supporting users that don't own IP Interfaces Xknx could be used as USB - IP bridge in the future.
See KNX specification …
-
Is it possible to discover the interface automatically?
Do you know which mechanism ETS is using to discover the KNX IP interface?
Thanks for the library. Worked from my first try.
-
I am trying to get Calimero Server to work with this module on a raspberry pi 5 running home assistant and I am facing some issues.
For one, I can get a different interface with TPUART to work prop…
-
Hello together,
my two devices of KNX USB Interface 332 from Weinzierl works correct with ETS, but on raspberry Pi4 i found no solution....
The MDT SCN-USBR.02 works fine , also on Pi4...... no Prob…
-
Hello.
I can not solve the connection problem.
I have Raspberry Pi 3 and knx-tpuart adapter - http://www.eelectron.com/prodotto/raspberry-pi-knx-interface/?lang=en, and it works.
Settings knxd - KN…