-
KwpCommon.cs does not catch repeated sync byte 0x55. My cluster always repeat sync byte and a pair of key bytes if it receives response a bit later than ideal timing, and almost always does it even wi…
-
# Steps to reproduce
Connect to an ECU which communicates using KWP2000 over K-line and perform a `ReadIdent`. ECUs I have tried (all of them in a 2005 Audi A4, type 8E/B7):
* `0x37`, Radio/navi…
-
# **Background**
KLineKWP1281Lib.h
KLineKWP1281Lib.cpp
# **Is**
Once an instance of the library is created the private variable _full_duplex cannot be changed
# **Notes**
Hey! I'm almos…
-
Hi,
I got this error while programming my CCM :
Sending WriteEeprom block (Address: $21B4, Values: $F4
Received "Write EEPROM Response" block: 01 20 B4 F4
WriteEepromResponseBlock body does not…
-
Hiya
Trying to use the latest release on Windows 10 using a generic K-Line cable, I am able to communicate with the cluster however when using GetSKC it returns unsupported cluster, when dumping th…
-
This library uses hardcoded address for ECU.
However VAG autos use non-standard ECU address (0x01) and have many other control modules on other addresses.
isage updated
5 months ago
-
Hello. It does not connect Arduino Nano with ECU VW T4 VAG number 023 906 022 E DIGIFANT 1.2 KW1281. Please help. Data from serial monitor:
---KWP 5 baud init; addr = 1
---KWPReceive sz=3 block_coun…
-
I found that switching between ECU and Cluster modules (closing one connection, waking another module and connecting) takes about 12000ms from read to read. Is there a way to do it quicker?
-
I got a car which asks for id 97 (0x61) in the "DecodeFrame" function (file diag.c). Any chance you can provide this as well?